Pages

Monday, January 18, 2021

Cardboard Spaceship for #StarGrave part 2

In my first post on this project, I ended with the first coat of primer applied. It took a while for both the weather and my free time to coincide. This past weekend, that happened. After letting the ship collect dust for a bit, I finally got back outside and added a second coat of primer. I then took the family on a long walk in the park. When we got back, and had dinner... well... what else was there to do but work on my ship!

I started with a very rough overbrush of a tan paint that I had mixed up at the local home improvement store for a project some year back. We still had more than half the can, and well... I'm a little lacking in craft paints. 

I thought I got pics of that, but apparently not. 

After that, I mixed in some Ultramarine Blue, and then brushed over the tan with that.





Then I used Metal Tone on the engine bits and the hatch on top. 

After that I added in some variety using Redstone, Cavalier Orange, and more of the Ultramarine Blue. Then, using a sponge and some black craft paint, I added more weathering, and using Filagree Silver, some highlights to the exposed metal.




I also added some spots of what I think of as blaster scorch marks. 



Overall I'm very pleased with my first attempt at making a cardboard model. it's a little rough, but will still look great on a table covered with sci-fi terrain. 

That isn't to say I would make my next one exactly the same way. For one thing, I didn't measure nearly well enough, and while I started with a plan, I was winging it way more than I should have. I was inconsistent in how I did the paneling. I should have figured that out before I started gluing. I also made the top structure way more complex a shape than I should have. Yes, card bends. That doesn't mean you should be making curved surfaces. I should have put in some detail under the top hatch. 

However, now that this is done, it's time to start thinking about the next ship I'll build. Something a little smaller I think.

No comments:

Post a Comment

Comment Moderation is in place. Email notifications are spotty... might be a bit before this gets published. Sorry.